AV播放网站,青草视频在线播放,19岁rapper潮水偷轨仙踪...,美女裸体无遮挡免费视频

本系列產品適用于化纖，尼龍布。調水漿需加10%—20%水洗牢度特強。

[性質]

外觀:乳白色液體

主成分:特殊樹脂

離子性:陰離子

含固量: 50%

1)易調色,色澤鮮艷飽滿。

2)牢度特好,耐水性特強,手感較柔軟,流動性好,覆蓋力強,花形輪廓清晰。

3)耐黃變(高溫下不易泛黃變色)。平整度好。

4）環保指數達國際環保織物要求。

[應用]滾筒、圓網、平網、手工印花和噴花多種工藝。

[操作工藝]

漿料+色漿+固色劑,根據實際情況調整(Mesh網布80-120目)印花→干燥

有條件：烘干、熱處理(130-150℃,3-5分鐘)效果更好。

[注意事項]每批次貨/每次使用前,必須認真試驗,確認后方可使用。

1)選擇合適的固色劑可以提高印花面的色牢度與摩擦牢度(注意固色劑的時效性) ,避免使用陽離子色漿和助劑。

2)干透后再進行熱處理,可以增加牢度。24-48小時后,方可測試牢度。

Other detailed information

This product applies to chemical fiber, nylon. Water slurry should add 10%-20% and the ability of wash is strong.

【Features】

Appearance :ivory liquid

Main component: special resin

Ionic: anion

Solid content: 50%

1)Easy to adjust color, bright and full color

2)Great fastness, resistant to wash, soft hand feel, good fluidity, high covering power and the contour is clear.

3)Resistance to yellowing(it is not easy to turn yellow ),good flatness.

4)The indicator of environment reach the requirement of international environmental textiles.

【Application】

Roller ，rotary screen， flat screen and manual printing and spray.

【Operation technology】

Slurry+paste+curing agent,according to real situation(mesh 80-120) to printing→dry

Conditions: baking and heat pressure(130-150℃，3-5minitues)better effect.

【Notes】Each batch of goods/each time of using,must have a careful test and using in a certain way.

1)Choosing suitable curing agent can improve the ability of fastness and friction for the surface of printing(pay attention to the time of curing agent), avoid to use cationic paste and auxiliaries.

2)Making a heat pressure after dry completely,it can increase fastness.And you can make a test for fastness after 24-48hours.